Note:
DR3200BT
supports NFC pairing. The NFC detection area is on the right of the
Power button.
1. Click the
MODE
button on the
DR3200BT
front panel to go to Bluetooth mode.
2. You should see
NOT PAIR
displayed on the LCD. If you see
BT LINK
and the Bluetooth icon is on, that
means
DR3200BT
is already connected to another device. You can clear it by pressing and holding the
BT
button for ~2 seconds until
NO LINK
is shown, then continue with the rest of the steps below.
3. Go to the Bluetooth menu of your device.
4. Ensure Bluetooth is turned On.
5. Select the device named DRIVEN.
6. If the pairing and connection is successful, the mobile will show connected while
DR3200
will show BT
LINK and the Bluetooth icon on LCD.
Bluetooth Operation
Pair and Connect
6. To repeat track(s)
- During playback, press
3/RPT
button briefly to play the current track repeatedly.
RPT ONE
will be
displayed on LCD.
- Press
RPT
button twice to play the track(s) in the album repeatedly.
RPT DIR
will be displayed on LCD.
- Press
RPT
button three times to repeat all tracks.
RPT ALL
will be displayed on LCD.
- Press
RPT
button four times to cancel the RPT function,
RPT OFF
will be displayed on LCD.
7. To play tracks at random
During playback, press
RDM
button to play all tracks at random. Press it again to cancel.
8. To search a track
Press
USB
button, TRK 0/00/000 (depending on the total tracks that are saved in the USB disk) will be
displayed on the LCD and the place marker in the 0 position will begin flashing.
After inputing your desired track, press
1/PLAY/PAUSE
button to play the track to be selected.
8
