________________________________________________________________________________________
6 of 24
Installation and Use
Unpacking
Please check the shipping carton for completeness. The carton should contain the following
parts:
1. Backrest with drive and manual control unit
2. Collapsible frame with base-plate incl. central suction cup (black)
3. Charging unit
4. Storage battery
5. Operating instructions
6. 4 x Suction cup (transparent) for mounting on the underside of base-plate
7. 2 x Side flap protector
Please note that the two side flap protectors are only supplied for USE in the UK
market!
If one of these parts should be missing, please inform your dealer.
Unpack the charging unit first, then unpack the remaining parts. The shipping carton should
be kept for later use (i.e. transporting and storing AKKULIFT
®
).
Prior to starting up the device for the first time we recommend to charge the storage battery.
Please observe the information given in section „Charging the Storage Battery‟ on page 17.
Instructions for use of side flap protectors for bathlifts
The side flap protectors must be used on baths fitted with handles!
Note: Failure in using the side flap protectors on integral bath handles, may result in
damage to your bathlift, which can not be covered under fair wear and tear.
1. Place hooked end of side flap protector over bath handle and pull downwards, as shown.
2.
The side flap protector acts as a guide rail and prevents the hand support rail from
obstructing the side flap when raising the bathlift.