Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 40

Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 34

P1752 Owner's Manual| REV 002.04.21.2015

April 21, 2015

Page 33

The information in this document is subject to change without notice.

Actuators not
working

Hi/Lo lockout may be
on

The light on the attendant
control panel is on

Unlock panel by
pushing lock
button and light
will go off

Faulty mains cable
(power cord)

Disconnect power cord
from bed that is not
functioning and use on
another bed that is
functioning, Reconnect
the power and test
functions on that bed.

Contact Primus
Medical by Drive
1-877-224-0946

Faulty pendant

Disconnect pendant and
test bed function with
known working pendant.

Contact Primus
Medical by Drive
1-877-224-0946

Bed stalls while
operating

Thermal shut down.

Bed works for a short
period of time then cuts
out. Check for obstructions
or any interference with
bed frame, such as
window seal or too much
weight on the bed frame.

Wait a period of
time before
using the bed
frame again. DO
NOT keep trying
to override, this
will shorten the
life of your
product

.

Casters making
ratcheting noise

Casters are locked

Casters are unlocked-
make sure the left caster
locks are facing up and
the right caster locks are
facing down.

Casters are
unlocked- make
sure the left
caster locks are
facing down
and the right
caster locks are
facing up.

Bed moving slow Power cord may be

unplugged from wall
outlet.

The power cord is not
plugged into wall outlet.
The bed is running off of
the battery back-up.

Plug the power
cord back into
the wall outlet
and bed should
move at its
normal speed.

«
...
32
33
34
35
36
...
»

Содержание Primus Medical PrimePlus P1752









































Отзывы:

Нет отзывов