Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 40

Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 26

P1752 Owner's Manual| REV 002.04.21.2015

April 21, 2015

Page 25

The information in this document is subject to change without notice.

BED MOUNTED TRAPEZE

TOOLS REQUIRED:



7/32” Hex Key



9/16” Hex Key



13/16” Wrench or socket



9/16” Wrench or socket

NOTE:

It is recommended that the Trapeze be assembled one end at a time.



Mount the (4) vertical Trapeze arms (A) by bolting them to the (2) mounting
plates at each end of the bed (B).



The vertical trapeze arms are mounted to the frame by (4) 3/8” Hex bolts
each.



Use (2) 3/8” bolts to attach the Cross Bar (C) to both vertical Trapeze arms
at one end of the bed and then use (2) 3/8” bolts to attach the cross bar
to both vertical Trapeze arms at the other end. Finger tighten the locknuts
until all (4) arms are secured to the cross bar. Tighten these 4 bolts
securely.



Tighten bolts on both arms on one end of the bed and then the other end.



Place rubber caps over the 3/8” nuts on the Cross Bar (C).



Loop Hand Bar straps over desired rungs within easy resident reach.

NOTE:

Make sure all bolts are facing the same way.

(A) Vertical
Trapeze arms (2)

(A)
Vertical
Trapeze
arms (2)

(B) Mounting Plate (2)

(B)
Mounting
Plate (2)

(C) Cross Bar

«
...
24
25
26
27
28
...
»

Содержание Primus Medical PrimePlus P1752









































Отзывы:

Нет отзывов