Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 40

Drive Medical Primus Medical PrimePlus P1752 Скачать руководство пользователя страница 22

P1752 Owner's Manual| REV 002.04.21.2015

April 21, 2015

Page 21

The information in this document is subject to change without notice.

LENGTH EXTENSION (80” and 84”)

TOOLS REQUIRED



3/16” Allen wrench



Remove the two 5/16” bolt holding the headboard support bracket in
position.



Adjust the headboard support bracket to the position required for the
mattress length being used.



Re-install the two 5/16” bolt through the frame tube and the headboard
support bracket.



Repeat process with the footboard support bracket.



The end mattress retainers must be properly adjusted for the length of the
mattress being used.

NOTE:

A Gap Fill may also be used to fill in the area at the end of the bed frame so

possible Entrapment Issues are minimized.

DANGER



Possible injury or death may occur if the bed is not adjusted to the proper
length for the mattress being used.



Ensure increase in total length of bed frame does not present a safety hazard
or impair access in room. Place new mattress against Mattress Retainer and
be sure mattress covers entire length of mattress support surface.

«
...
20
21
22
23
24
...
»

Содержание Primus Medical PrimePlus P1752









































Отзывы:

Нет отзывов