7
6
Chapter 7 : REPLACABLE PARTS
The replaceable parts and accessories of T.E.N.S. devices are as given below
–
Except leads, electrodes and battery, battery case cover, please do not try to
replace the other parts of a device.
NO. PARTS
01
ELECTRODES LEADS
02
ELECTRODES
03
9V BATTERY TYPE 6F22
04
BELT CLIP
05
BATTERY CASE COVER
06
LEAD CONNECTOR
07
MAIN PCB
08
INTENSITY KNOB
09
B-N-M SWITCH
10
PULSE WIDTH KNOB
11
PULSE RATE KNOB
Chapter 8 : ACCESSORIES
Each set AGF-3X TENS are completed with standard accessories and standard
label as given below
I. Accessories
REF. NO.
DESCRIPTION
Q
’
TY
AGF-101
40 X 40 mm Adhesive Electrodes
4 pieces
AGF-111N
Electrodes Leads
2 pieces
9 V Battery
1 piece
Instruction Manual
1 piece
Carrying Case
1 piece
Chapter 6 : TECHNICAL SPECIFICATIONS
The technical specification details of AGF-3X TENS are as follows.
MECHANISM
TECHNICAL DESCRIPTION
1.
Channel
Dual, isolated between channels
2.
Pulse Ampulitude
Adjustable, 0 - 80 mA peak into 500 ohm load
each channel
3.
Pulse Rate
Adjustable, from 2 to 150 Hz
4.
Pulse Width
Adjustable, from 30 to 260 microseconds
5.
Modulation Mode
Pulse rate is automatically varied in a cyclic
pattern over an interval of nominally 10
seconds.(in max 150Hz) Pulse rate decreasesl
inearly over a period of 4 seconds from the
control setting value to a value which is 40%
less. The lower pulserate will continue for
1second. Then increase linearly over a 4
seconds period to its original value. The
original pulse rate will continue for 1 second.
The cycle is then repeated
6.
Burst Mode
Bursts occur twice very second.
Pulse width(adjustable), frequency = 100 Hz
7.
Wave Form
Asymmetrical Bi-Phasic Square Pulse
8.
Voltage
0 to 34 V (Load : 500 ohm)
9.
Max. Charge per pulse 20 micro-coulombs
10.
Burst Mode
One 9 Volt Battery.(alkaline, or nickel-cadmium
rechargable)
11.
Battery Life
Approximately 50 hours at nominal settings.
12.
Size
70(H) x 103(W) x 23.5(T) mm
13.
Weight
115 grams(battery included)
PDF created with FinePrint pdfFactory trial version