Drift Innovation
X170 Action Camera
3 of 28
II) Quick Start
Turning the Camera On
Press and hold the Select button
(
/
)
for 2 seconds. The LCD screen
should turn on and the select button should turn green, the remaining battery charge will be
shown in the top left, and the remaining memory card storage will be shown in the right
hand corner.
Taking Video Footage
1. Aim at what you want to record.
2. Press the Select button to start recording (the unit should bleep, and the light on the
select button turn red.).
3. Press Select button again to stop recording (Low pitch bleep, light turns green)
Capturing Photos
1. Press the Menu button.
2. Use the Up and Down arrows to highlight the settings option, and press the Select button.
3. The screen will show a list of settings, highlight camera options and press select . The
camera options submenu should appear, highlight record mode and press select to change to
photo mode. Press the menu button three times to return to viewing mode. Aim at what you
wish to capture and press the select button (One bleep, and the light turns red). The picture
is captured as soon as the light turns red, although it stays on for a second while saving.
Drift Innovation
X170 Action Camera
4 of 28
III) Camera Precautions
Notice the following guidelines when using your camera
• The X170 is shock resistant, not shock proof.
• For your safety, do not press the buttons on the camera during sports activities.
• Do not place the camera in areas prone to dust or damp for extended periods of time.
• Do not leave the camera in places exposed to extremely high temperatures, such as
under direct sunlight, for extended periods of time. This may affect the camera housing and
internal components.
• Clean the lens with a soft cloth to remove fingerprints or dust.
• We recommend using Lithium AA batteries for longest life.
• The camera has a working temperature range of -10°C to 40°C The working temperature
range of a normal Alkaline AA battery is 0°C to 40°C. Below 0°C always use Lithium
batteries.
• Turn the camera off before removing the batteries or memory card. The card and the
data may be damaged if the memory card is inserted or removed while the camera is
still on.
• Remove the batteries and memory card before storing the camera for long periods of
time. Keep it in a well-ventilated place to prevent mould.
130.com.ua
Autogood products «130»
