DRESSTA 560C, Руководство оператора, Страница: 13 / 167

INTRODUCTION
SECTION 1
Page 3
DRESSTA OM560C99/1E
1.1. INTRODUCTION
Fig. 1.1. 560 Series C Wheel Loader
a - Right Hand Side of the Machine
b - Left Hand Side of the Machine c - Front of the Machine
d - Rear of the Machine
GENERAL
Throughout this manual there will be two types of cross references. One type is to a heading in
another section. The other is to a heading within the same section. Unless it is otherwise stated,
references will be to the same section. Refer to the section contents page at the beginning of the
individual sections for specific page numbers.
Throughout this manual the use of the terms "left", "right", "front", and "rear" must be understood to
avoid confusion when following instructions. "Left" and "right" indicate the left and right sides of the
machine when facing forward in the operator's seat. See Fig. 1.1.
Some illustrations are of general application of this model and may not show your machine
accurately in all details.
WARNING!: This symbol and text in bold letters is used throughout this manual
to call your attention to instructions concerning personal safety. Observe and
follow these instructions. Be certain anyone operating and servicing this
machine is aware of these rules. Failure to follow these rules may result in injury
or death.
IMPORTANT: This sign and text in italics is used throughout this manual to call your attention to
key problems for machine operation. Failure to follow such instructions may result in damage of the
machine and heavy material losses.