DRESSTA 32501, Руководство оператора

Страница: 20 / 177

SAFETY PRECAUTIONS
SECTION 2
Page 3
DRESSTA TD-15H
2.1. GENERAL
WORK SAFELY – FOLLOW THESE RULES
This symbol and text with bold letters is used throughout this manual to call
your attention to instructions concerning your personal safety. Observe and
follow these instructions. Be certain anyone operating and servicing this
machine is aware of these rules. Failure to follow these rules may result in injury
or death.
WARNING! The machine can only be operated by a person who is familiar with
this manual, knows operation of the machine and its mechanisms, experienced
and properly licensed to operate such machines. Carefully observe and follow all
instructions provided in this manual.
The instructions and information given in this section do not cover all you ought to know to operate
the machine safely. Detailed instructions regarding operational safety appear in the following
sections of this manual.
Human error is a contributing factor in most equipment-related injuries. Haste, carelessness and
lack of training are the primary causes of injuries.
Most operating injuries occur because of excessive speed, loss of control, failure to observe
warning signs, slipping or falling while entering or dismounting, a lack of berms on roadways or
piles, lack of a ROPS or seat belt, or not watching in the direction of travel.
Most maintenance injuries occur during welding or when using hammers or wrenches. The most
common faults are improper work position, a slipped tool, missed aim, a broken tool, flying chips
and no welding hood.
Think before you act. A careful operator or maintenance man is the best insurance against an
accident.
Always wear proper safety equipment. Avoid wearing jewelry and loose fitting clothing; they could
catch on moving parts, which could result in serious injury or death. Hard hat, sturdy rough-soled
work shoes or safety shoes, ear protectors, reflective clothing, safety glasses and heavy gloves
may be required. Consult your employer for specific safety equipment requirements.
Each job site and application may have personal safety requirements. Carefully evaluate your
particular application and machine for equipment such as heater and defroster, all windshield
wipers, warning lights, side view and rearview mirrors, back-up alarms, fire extinguisher, rotating
beacons and additional lights. If in doubt, contact your distributor.
The machine should be equipped with a fully charged fire extinguisher. All personnel should be
instructed in proper usage. Recharge immediately after use. If machine is equipment with
Grammer operator's seat the extinguisher is placed in the cab on the left hand side of the
operator’s seat (Fig. 2.1).
https://www.truck-manuals.net/