Dreizler marathon M 10001.1, Руководство пользователя, Страница: 149 / 184

Basic configuration of burner controller RWF40
dreizler A 3001 E - 18.12.2015 | A 2069 - 1.09 | EN - 21.10.2009 149
Return to standard display by pressing 'EXIT', or wait 30 seconds (time-out).

47.1.3 Changing the configuration (configuration level) based on the standard display.
1) Press button 'PGM' 2x for at least 2 seconds.

2) Setpoint display shows 'C 111' (analog inputs).

3) Use key 'q' to select the digit for changing the code. This is signalled with

a blinking display.

4) Press key 'p' to reconfigure the digit.

5) Wait 2 seconds, then the value is saved automatically.


6) Press button 'PGM' shortly, and 'C 112' is shown (limit comparator, controller type).

7) Repeat setting procedure as for C 111.


8) Press button 'PGM' shortly, and 'C 113' is shown (device address, unit).

9) Repeat setting procedure as for C 111 and C 112.


10) Press button 'PGM' shortly several times.

11) The setpoint display shows 'SPL'.

12) Use the keys 'pq' to enter the lower setpoint limit.

13) Wait 2 seconds, then the value is saved automatically.

14) Press button 'PGM' shortly, 'SPH' is displayed.

15) Use the keys 'pq' to enter the upper setpoint limit.

16) Wait 2 seconds, then the value is saved automatically.


Return to standard display by pressing 'EXIT', or wait 30 seconds (time-out).

NOTICE:
The controller must be set to manual operation to conduct the burner test. Press the button 'EXIT' for at
least 5 seconds.
Run time SA t t - 30
Burner activation HYS 1 - -3,0
Deactivation 2nd step HYS 2 - 3,0
Burner deactivation HYS 3 - 5,0
Code 111 without external sensor 9 0 0 0
Code 111 with external sensor 9 0 3 0
Code 112 without external sensor 0 0 0 0
Code 112 with external sensor 0 0 1 0
Code 113 0 1 1 0
Lower setpoint limit SPL - 53,0
Upper setpoint limit SPH - 85,0