Fig
. 9
7.
Determine the position of both
Back
panels (02)
.
NOTE:
a)
Narrow side of the
Back panel
cannot be trimmed and should
face the center of the Back wall.
b)
Wide side of the
Back panel
can
be trimmed to the size of the wall
and should face the corner.
Place a mark on the wide side of the
Back panel
with a distance of
(W/2 – 1”)
from the center edge of
the
Back panel
to the wide side of
the
Back panel
and draw a straight
line from top to bottom.
See Fig. 10 for details.
Fig
. 10
Rev 1.1
8
W/2-1”
W/2-1”
b
b
a