© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools
LINEA Shower Panel Installation Manual Ver 2 082021
4
©2021 DreamLine® All Rights Reserved.
Soft Head
Hammer
Ø1/8"
(3mm)
Drill Bit
Drill Bit
Ø5/16"
(8mm)
Professional-Grade
Glass Suction Cup
(optional but
recommended)
Extender Driver Bit
#2 Phillips
Driver Bit
Level
Measure
Tape
Pencil
Drill
Power
Razor Knife
#2 Phillips
Screwdriver
Silicone
Hacksaw
Work Gloves
Safety Glasses
Unpack
your un
it carefully and inspect it. Lay it out and identify all parts using the
Detailed
Diagram
on pages
5-6
;
and packing list in this manual as a reference. Before discarding the
carton, check for small hardware bags that may have fallen to the bottom of the box. If any
parts are damaged or missing, please contact DreamLine
®
for replacement. The shipping
boxes may contain extra parts not used in
your
model configuration.
Retain these installation instructions for future reference.
NOTE
Verify that the correct model size
has been ordered; measure the finished opening
before
proceeding with the installation.
TIP
Confirm that the finished walls are plumb and the threshold is level and pitched into the
shower area.
Cover the shower/tub drain with tape prior to installation to prevent the loss of screws
or small parts.
To prevent stripping the screw heads, set the screw gun clutch to a low setting when
installing screws and bolts.
Use a type of drill bit that is appropriate for drilling into the finished surface material.
Use a good quality waterproof, mildew-resistant 100% silicone.
Miter Saw
Carpenter’s Square
OR
