© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
14
AQUA-Q FOLD Shower and Tub Door Manual Ver 1 112020
©2020 Dr
eamLine® A
ll R
igh
ts R
eser
ved
1
2
TIP
12
11
x1
x1
NOTE
NOTE
11
12
Inside
Measure from
top of door to
top of hinge
Measure from
bottom of door
to bottom of
hinge
Measure
between
the two
hinges
Remove the 1/2” shims and open the door.
approx
1”
Use a razor knife to
notch the
Vertical Vinyl Seal (#12)
to fit around the
Bottom Sweep Vinyl (#11)
as shown to prevent leakage in the corner.
Notch
Bottom Vinyl Seal (#11)
+/- 1” t
o fit around sweep and
press the
onto the bottom edge of the
Door Glass (#01)
.
Attach the
Vertical Vinyl Seal (#12)
to the inside edge of the
Door Glass
(#03)
that is on the same side as the
shower head so that the flexible fin is
pointing away from the water source.
inside
Parts Needed
Tools Needed
Fig 6
Vinyl Seals Installation
6