Tools Needed
ALLIANCE PRO/ALLIANCE PRO LT Shower Door Manual Ver 1 2/2021
10
© 2021 DreamLine® All Rights Reserved
NOTE
NOTE
Fig 3a
!
The following Step is for the installation of additional
Bumpers (#4b)
for
S-Curved Glass
only.
Please skip this Step if installing any other
Door Glass
option.
17.5”
(444mm)
17.5”
(444mm)
Measure
17-1/2”(444mm)
from the bottom of the
right
Wall Profile (#01)
(Or the Wall Profile on the
shower head side) and mark
the center of the profile for
drilling. Drill a
7/32”
(6mm)
hole only through
the
Wall Profile (#01)
.
Fig 3a
Measure
17-1/2”(444mm)
from the top of the left
Wall Profile (#01)
(Or the
Wall Profile farthest from
the shower head) and mark
the center of the profile for
drilling. Drill a
7/32”
(6mm)
hole only through
the
Wall Profile (#01)
.
Fig 3a
3a
1
2
1
2