© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
ASCEND Shower Door Manual Ver 1 022021
14
© 2021 DreamLine® All Rights Reserved
NOTE
Use a glass suction cup and a helper to carefully lift the
Door Assembly
into the opening. Slide the
Glass Profile (#07)
over the outside of the installed
Wall Profile (#01)
. Be sure the
Wall Bracket (#02)
and
Glass Bracket (#08)
inside the
top of both
Profiles
interlock. The center groove in the
Bottom Pivot
must also fit over the
Threshold Block
installed in
Step #6
. Use the included 5/8” shims under the door glass. This protects the bottom edge of the glass while keeping the
Door Glass
at the correct height. Use a level to adjust the
Door Glass
until it is level and plumb.
Fig 7
The center groove in the
Bottom Pivot
must sit on
the
Threshold Block
,
which is secured to the
threshold.
Threshold
Wall Profile
Overhead View
Glass Profile
and Door
Assembly
TIP
Use the 5/8” spacers under
the
Door Glass
during
installation to keep it at the
correct height and protect
the bottom edge of the
glass.
Bottom View
2
1
Fig 7
7