Dreadbox DYSMETRIA, Руководство по монтажу

Страница: 2 / 41

1. Before you get started
1.1 Tools you will use
The following tools are required for this assembly, but they are not included in the KIT:
- a soldering Iron with variable temperature setting
- a small sponge for cleaning the soldering iron
- a cutter
- solder wire (two kinds suggested 0,5mm and 1,5 mm)
- a small flat screw driver
- a USB adapter 1A or more
- a USB type A to type B cable
- a multimeter
- 2x crocodile test cables
- 1x 3,5mm patch cable
Before you start the construction of this DIY project, make sure you have basic soldering skills and
that you can identify the electronic components. If it is your first time soldering, there are several
tutorials on youtube that can help you :)
It would be easier and helpful for you to work on a big desk, so as to have plenty of space to work on.
Also a room with an open window would be ideal while you solder.
Before you start the soldering process, make sure you have all the components needed and noted in
the BILL OF MATERIALS SECTION. Please note that we might have added more components than
needed or less (hopefully not). It would be very helpful if you count all the components before starting
the project (but without removing these from their bags).
Make sure to READ THE MANUAL before you start assembling!