Draytek VigorSwitch P1085, Руководство пользователя, Страница: 60 / 267

VigorSwitch P1085 User’s Guide 52
I
I
I
I
-
-
9
9
-
-
3
3
B
B
r
r
i
i
d
d
g
g
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page allows the network administrator to configure required information to negotiate
with other VigorSwitch for determining the bridge switch.
Available settings are explained as follows:
Item Description
Priority Specify the bridge priority. The valid range is from 0 to 61440,
and the value should be the multiple of 4096. It ensures the
probability that the switch is selected as the root bridge, and
the lower value has the higher priority for the switch to be
selected as the root bridge of the topology.
Forward Delay Specify the STP forward delay time, which is the amount of
time that a port remains in the Listening and Learning states
before it enters the Forwarding state. Its valid range is from 4
to 10 seconds.
Max Age Specify the time interval in seconds for a switch to wait the
configuration messages, without attempting to redefine its
own configuration.
Tx Hold Count Specify the tx-hold-count used to limit the maximum numbers
of packets transmission per second. The valid range is from 1
to 10.
Hello Time Specify the STP hello time in second to broadcast its hello
message to other bridge by Designated Ports. Its valid range is
from 1 to 10 seconds.
Apply Apply the settings to the switch.