Draytek VigorSwitch P1085, Руководство пользователя, Страница: 128 / 267

VigorSwitch P1085 User’s Guide 120
V
V
I
I
I
I
I
I
-
-
4
4
L
L
L
L
D
D
P
P
LLDP is a one-way protocol; there are no request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and processed by
stations implementing the receive function.
V
V
I
I
I
I
I
I
-
-
4
4
-
-
1
1
P
P
r
r
o
o
p
p
e
e
r
r
t
t
i
i
e
e
s
s
This page allows a user to set general settings for LLDP.
Available settings are explained as follows:
Item Description
LLDP State Enable – Enable LLDP protocol on this switch.
Disable – Disable LLDP protocol on this switch.
LLDP PDU Disable Action It is available when LLDP State is disabled. Specify the action
for VigorSwitch to execute.
Filtering - Packets will be dropped.
Bridging - Packets will be transmitted to the device within the
same VLAN.
Flooding - Packets will be transmitted to all ports.
Transmission Interval Select the interval at which frames are transmitted. The
default is 30 seconds, and the valid range is 5–32768seconds.
Holdtime Multiplier Select the multiplier on the transmit interval to assign to TTL
(range 2–10, default = 4).
Reinitialization Delay Select the delay before a re-initialization (range 1–10 seconds,
default = 2).
Transmit Delay Select the delay after an LLDP frame is sent (range 1–8192
seconds, default = 3).
Apply Apply the settings to the switch.