Draytek VigorSwitch P1085, Руководство пользователя, Страница: 124 / 267

VigorSwitch P1085 User’s Guide 116
V
V
I
I
I
I
I
I
-
-
1
1
T
T
R
R
-
-
0
0
6
6
9
9
This page allows a user to configure TR-069 settings for connecting to VigorACS 2.
Available settings are explained as follows:
Item Description
ACS Settings TR-069 - Click Enable to activate the settings on this page.
URL - The URL must be entered according to the ACS (Auto
Configuration Server) you want to link.
Wizard - Click it to enter the IP address of VigorACS server,
port number and the handler.
Username - The string of username must be entered according
to the VigorACS (Auto Configuration Server) you want to link.
Password - The password must be entered according to the
VigorACS (Auto Configuration Server) you want to link.
Last Inform - Display the time that VigorACS server makes a
response while receiving Inform message from CPE last time.
Test Inform - Click Test With Inform to send a message to test
if such CPE is able to communicate with VigorACS server.
CPE Settings CPE Client - Choose HTTP or HTTPS for connecting with
VigorACS.
URL - Display the URL of VigorSwitch.
Port - Type the username and password that VigorACS can use
to access into this switch.
Username - Enter the username that VigorACS can use to
access into this switch.
Password - Enter the password that VigorACS can use to access
into this swtich.
TLS Version Settings TLS Minimum Protocol Version - Due to security
consideration, the built-in HTTPS VPN server of the router had
upgraded to TLS1.x protocol. Select one of the versions.
Periodic Inform Settings Periodic Inform Settings - Click Enable to configure the
interval time.