Draytek VigorSwitch P1085, Руководство пользователя, Страница: 118 / 267

VigorSwitch P1085 User’s Guide 110
V
V
I
I
I
I
-
-
1
1
P
P
r
r
o
o
p
p
e
e
r
r
t
t
i
i
e
e
s
s
This page allows a user to configure general settings for PoE and configure priority of each
port for supplying PoE power. While maximum power budget is reached, power will be served
starting with critical priority.
If the priority setting for all GE ports is configured as the same value (e.g., High); then, GE1
will have the highest priority to obtain PoE power in actual operation.
Available settings are explained as follows:
Item Description
PoE Mode  Disable – Disable the PoE function.
 Auto – Provides plug and play PoE function. PoE schedule
and Power Limit are disabled in this mode.
 Manual – Before using PoE>>Schedule, set Manual as PoE
mode.
Ports Use the drop down list to select the port (GE1 to GE8) or ports
for applying PoE configuration.
Enable  Enable – Make the selected ports be applied with PoE
mode.

Disable – Make the selected ports be not applied with PoE
mode.
Priority Select Priority for PoE device.

Low –Set PoE device to low priority connection.

High –Set PoE device to high priority connection.

Critical - Set PoE device to highest priority connection.
Power Limit This setting is available when Manual is selected as PoE Mode.
Enter the value as the maximum limit of power given to each
physical port.
Apply Apply the settings to the switch.