Draytek VigorSwitch P1085 Скачать руководство пользователя страница 114

Страница: 114 / 267

VigorSwitch P1085 User’s Guide

106

This page allows a user to configure egress port rate limit. The egress rate limit is the number

of bits per second that can be received from the egress interface. Excess bandwidth above
this limit is discarded.

Available settings are explained as follows:

Item Description

Egress Shapping Rate

Ports

Use the drop down list to select the port profile (GE1 to GE8)
or profiles.

State



Disable – Disable egress bandwidth control.



Enable - Enable egress bandwidth control.

CIR (Kbps)

Enter the rate value,<16-1000000>,unit:16 Kbps.

Apply

Apply the settings to the switch.

Modify

- Click it to modify the settings for the selected port

profile.

Содержание VigorSwitch P1085












































































































































































































































































Результаты поиска

Содержание VigorSwitch P1085

Отзывы:

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 114 / 267

Результаты поиска

Содержание VigorSwitch P1085

Отзывы: