8
800-523-6049 |
www.rldrake.com
FRONT PANEL
LCD Display:
used for Network Settings (as shown under “Front-Panel Configuration”)
Controls:
used for Network Settings (as shown under “Front-Panel Configuration”)
REAR PANEL
HDMI Out:
HDMI A/V Output
HD-SDI Out:
HD/SD SDI Output *
(1)
SPDIF:
S/PDIF Digital Audio Output
Audio Out:
Analog L+R Audio Output
Video Out:
Composite Analog Video Output *
(1)
Component Out:
Component Video Output
Remote Control:
GigE Ethernet Port for User Interface
Data Input:
GigE Ethernet Port for IP Input
Expansion Port
(not used)
8VSB/QAM Input:
Digital Tuner Input
+5VDC, 2.0A:
DC supplied from included AC adapter.
Front and Rear Panel Operation
1
2
3
4
8
5
9
6
10
12
7
11
13
3
*(1) Note - Current firmware allows for SD-SDI or composite video. When the video resolution is 480i and SD-SDI is set to
"Enable", you'll get SD-SDI, but NOT composite. If SD-SDI is set to "Disable", you'll get composite, but not SD-SDI. If the
video resolution is anything other than 480i, this has no effect.
1
6
7
9
2
4
5
8
10
11
12
13
