17
800-523-6049 |
www.rldrake.com
Revert Changes:
Returns to previous settings after the last “Apply”.
Apply:
Enters the current displayed settings into the decoder.
Player Control
Source Type:
UDP Multicast
Multicast Group:
Enter IP address
Port:
Enter in port number to be used.
IGMP Version:
Supports either IGMPv2 or IGMPv3
Program Selection:
Auto
- Selects the first program in the PAT table
Program Number - User enters the desired program number to receive.
Manual Select - When selected "Start Scan" button ( ) will be displayed.
Clicking on the "Start Scan" button will display all available programs. Select the desired program by checking the
respective Select box.
PLAYER CONTROL: UDP MULTICAST
1
2
3
4
7
5
8
6
Figure 4a - "Player Control" - UDP Multicast
2
3
4
5
7
8
1
Figure 4b - "Program Selection" - Start Scan
6
