© 2018 Dragonfly
Fixed Projection Screen Manual
181004-0945
Step 7. Attach and Install the Mounting
Brackets
A. Loosely secure the two mounting brackets to the sliding
nuts in the top frame using the M5 x 8mm screws. The
brackets should just be able to slide left and right.
B. Loosely secure the circular metal half of the magnets to
the lower frame, do not tighten the screws completely,
the brackets should just be able to slide left and right.
Step 8. Hang the Screen
A. Measure the overall Length and height of the screen frame.
B.
For Drywall:
Drill 4 holes in the wall at the desired height.
The distance of the horizontal holes should be about 2/3
the width of the frame, and the vertical distance of the holes
A
B-105
C.
For Concrete:
Drive the concrete anchors into the holes
drilled in Step B. Drive 2
M5x40mm Screws
into the concrete
anchors leaving 5mm to hang the screen. Install the lower 2
magnet pieces using 2 M5x40mm screws. Hang the screen
on the upper brackets and attach the lower part of the
frame to the wall with the magnets.
A
B
C
5mm
Upper
Lower
Care and Cleaning
Clean the screen with a soft cloth using mild soap and water only. DO
NOT use harsh detergents, chemicals, distilled spirits or petroleum-
based chemicals to clean the screen. Doing so may result in severe
damage to the screen or the frame coating.
Use a household vacuum cleaner with a brush or furniture cleaning
attachment to clean the felt frame material. Avoid using excessive
amounts of water on the felt.
Dimensions (in Inches)
A
B
C
D
E
F
G
92"
45.4
80.2
45.7
80.7
1.7
1.3
100"
49
87.2
49.6
87.7
1.7
1.3
106"
52
92.4
52.5
92.9
1.7
1.3
110"
53.9
95.9
54.5
96.5
1.7
1.3
120"
57.8
102.8
58.4
103.4
1.7
1.3
Technical Support
p.866.838.5052
INSTALLATION MANUAL
Ultra White and Ultra Acoustiweave™ Thin-Bezel Fixed Projection Screens
IMPORTANT: BEFORE YOU BEGIN
•
To avoid staining or scratching the screen, wear the included
gloves during installation. Wash your hands and clean the work
area before starting.
•
Do not use knives or sharp objects to open the packing boxes.
•
To avoid a serious fire hazard, DO NOT install the screen over an
electrical outlet or switch.
