Door Panel & Slammer Kit for XP1K
Can-Am Maverick Winch Mount Kit
Part # DFR-5TMWM-B
Can-Am Maverick
Black
Congratulations on your purchase of the DragonFire Winch Mount Kit for the Can-Am Maverick. Designed to work
with the DragonFire RacePace Front bumper, this mounting kit gives you the functionality of a winch with the rugged
and race ready appearance that only DragonFire can. Check out additional products at your local authorized
DragonFire dealer or on our website
http://www.DragonFireRacing.com
DFR-5TMWM is designed for mounting the Warn Vantage 3000 and similar sized winches.
This product requires the use of the DragonFire RacePace Front Bumper.
•
Read and understand these instructions before installing product
•
Follow instructions with winch for best practices
•
Do not use product if there is any sign of damage
Disclaimer
Off road activities can be hazardous and could lead to injury, dismemberment, paralysis and death. No warranty
of representation is made as to the products ability to protect the user from any injury or death. The user
assumes that risk. The acceptance and /or use of this merchandise purchased from DragonFire by the
customer hereby shall release DragonFire from any and all liability pertaining to the use of such merchandise.
Step 1:
Place vehicle on a flat and level surface. Place gear
selector in park and remove keys from the ignition
.
Step 2:
Remove grill plate from DragonFire RacePace front
bumper, retaining the nuts for reuse. (Figure A)
Step 3:
Remove the mounting hardware and take factory front
bumper off of vehicle per RacePace front bumper instructions.
Retain the factory bolts on the upper mount. If removing a
DragonFire RacePace bumper, also retain the nuts and washers
on the lower mounts.
Tools Required
3/16 Allen Wrench
8mm Allen Wrench
Ratchet & 6” extension
1/2” Socket & Wrench
9/16” Socket & Wrench
13mm Socket & Wrench
10mm Socket
17mm Wrench
DragonFire Racing
3191 N. Washington St. Suite 2
Chandler, AZ 85225
1 (800) 708-9803
Dragonfire Racing
