DragonFire
DragonFire Racing
3191 N. Washington St. Suite 2
Chandler, AZ 85225
1 (800) 708-9803
WWW.DRAGONFIRERACING.COM
Adjustable H.D. Aluminum Seat Base
Part #
15-1111
RZR 900, XP 1000 & XP4 1000 Aluminum
Congratulations on the purchase of the DragonFire Adjustable HD Aluminum Seat Base. This seat base is designed to be
stronger than the plastic OE seat base while retaining the sliding feature on seats that are equipped with it.
Adjustable HD seat base does not include OEM components to make non-adjustable seats adjustable. For
non-adjustable seats, contact your local Polaris dealer for the Seat Slider kit.
Disclaimer
Off road activities can be hazardous and could lead to injury, dismemberment, paralysis and death. No warranty
of representation is made as to the products ability to protect the user from any injury or death. The user assumes
that risk. The acceptance and /or use of this merchandise purchased from DragonFire by the customer hereby shall
release DragonFire from any and all liability pertaining to the use of such merchandise.
Step 1:
Place vehicle on a flat and level surface. Place gear selector in “Park” and remove
keys from the ignition.
Step 2:
Remove seats from vehicle.
Step 3:
Remove factory seat base from seat, retaining the screws and washers. Make sure to
use hand tools to remove the seat mounting screws to prevent stripping threads.
(Figure A)
Step 4:
Remove latch cover, backer plate, lever, spring and hardware from factory seat base. All
components will be reused on the new the H.D. Aluminum Base. (Figure B) Be careful
when removing latch cover and spring as the spring is under tension and may become
a projectile.
Step 5:
Remove factory adjuster gate, hardware and rubber bumpers from factory seat base
and transfer to H.D. Aluminum Base. Make sure to press heads of carriage bolts flat
against the seat base while removing/installing nuts to prevent square holes from being
stripped. (Figure C)
Step 6:
Install latch components into supplied latch body in the reverse order they were
removed from the factory seat base. (Figure D)
• Read and understand these instructions before installing product
• Do not use power tools on seat mounts.
• Do not use if there is any sign of damage to product
• Frequently inspect hardware to ensure everything is secure
• This product does not promise any additional safety beyond the OEM product
Tools Required
T27 Torx
10mm socket and ratchet
10mm wrench
flat head screw driver
