Dragon Touch Vista 5, Руководство пользователя

Страница: 11 / 86

1. Sounds: Volume, Key Tone, Touch Tone, Boot Tone
You can adjust the volume of the camera and turn on/off key tone, touch tone or boot
tone.
2. Distortion Calibration: ON / OFF
Default setting is OFF.
Turn on Distortion Calibration, it can correct the image distortion.
3. Angle: 170°, 140°, 110°, 70°
Default setting is 170°.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Super Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
4. Diving Mode: ON / OFF
Default setting is OFF.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use between
10 and 80 feet.
5. WDR: ON / OFF
Default setting is OFF.
Wide Dynamic Range (WDR) retains a greater level of detail in the dark and bright areas of
an image. The result is a photo that is properly exposed for both of these extremes. This
setting is especially useful for scenes that are backlist or that have large bright regions and
a dark foreground. WDR is available in Video mode only.
6. Auto Power Off: Off, 1 Min, 3 Min, 5 Min, 10 Min
Default setting is OFF.
Powers off your Vista 5 after a period of inactivity to save battery life.
7. Screen Saver: Off, 30 Sec, 1 Min, 3 Min
Default setting is 1 Min.
Turns off the display after a period of inactivity to save battery life. To turn on the display
again, press any button on the camera.
8. Language: English / Français / Deutsch / Español / Italiano/ Português
Default setting is English.
9. Date Format: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Default setting is MM/DD/YYYY
10. Set Date: MM/DD/YYYY
You can set the date of the camera.
11. Set Time: HH/MM
You can set the time of the camera.
12. Date Stamp: Off, Date & Time, Date
Default setting is Date & Time.
If you select Date & Time, this camera adds Date & Time to the videos and photos you
take.
13. Power Frequency: 50Hz, 60Hz
Default setting is 50Hz.
14. Format Card
To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
To reformat your card, please enter System Setting, then scroll through the options to
locate and tap ‘Format Card’, then tap ‘Confirm’.
15. Reset: Reset to factory? Cancel / Confirm
This option resets all settings to their default values.
16. About: Model / Version
You can check the model and version of your Vista 5.
17 18