Dräger VVP 1000, Инструкция по эксплуатации

Страница: 24 / 32

24 Dräger VVP 1000
Operational characteristics
5 Operational characteristics
5.1 Basics
5.1.1 Operating and display elements
03133026_de.eps
00133547.eps
6
5 4
3
1
2
1 List of channels List of the 10 channels from the active channel range register.
2 Channel header bar:
No.
Display of the bus device and bus address (transmitter/ relay module, etc.)
TAG Bus device designation
PV Display of measured values (measured gas/measured value/measuring range, etc.)
Status Status display
Fault
Maintenance/urgent maintenance
Deactivated bus device
Actual alarm A1 to A4
Average alarms MA1 to MA4
Transmitter warm-up phase
3 Channel range register Each of the 10 channel range registers shows 10 channels.
4 Event symbol The event symbol appears when an event is pending (see Section 6.1 on page 26).
5 Menu Select this button to access the menu.
6
Log user in or out
User level display
Select this button to log users in or out.
When a user is logged in, the current user level is displayed in the icon.
Three user levels are available: Configurator, Administrator and Service.