Dräger Polaris 600 Скачать руководство пользователя страница 8

Страница: 8 / 96

Safety-related information

Instructions for use

Polaris 600

Safety-related information

General safety information

The following WARNING and CAUTION

statements apply to general operation of the

medical device.

WARNING and CAUTION statements specific to

subsystems or particular features of the medical

device appear in the respective sections of these

instructions for use or in the instructions for use of

another product being used with this device.

Strictly follow these instructions for use

Strictly follow the instructions for use of
other Dräger devices

Strictly follow the assembly instructions

WARNING

Risk of incorrect operation and of incorrect

use

Any use of the medical device requires full

understanding and strict observation of all

sections of these instructions for use. The

medical device must only be used for the

purpose specified under "Intended use" (see

page 15). Strictly observe all WARNING and

CAUTION statements throughout these

instructions for use and all statements on

medical device labels.

Failure to observe these safety information

statements constitutes a use of the medical

device that is inconsistent with its intended

use.

WARNING

Risk of incorrect operation and of incorrect

use

For correct use of a Polaris 100 or 200 light in

combination with the Polaris 600 light, read

and observe the Polaris 100/200 instructions

for use.

WARNING

Risk of incorrect operation and of incorrect

use

For correct use of a display mount in

combination with a Polaris light, read and

observe the Polaris Multimedia instructions

for use.

WARNING

Risk of damage to the device

The light system must only be installed by

assembly personnel. The installation must be

carried out in accordance with the assembly

instructions.

Содержание Polaris 600

































































































Результаты поиска

Содержание Polaris 600

Отзывы:

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 8 / 96

Результаты поиска

Содержание Polaris 600

Отзывы: