manualshive.com logo in svg

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 6 / 96

Поделиться
Скачать
Dräger Polaris 600 Скачать руководство пользователя страница 6

Information regarding the instructions for use

6

 Instructions for use

 

Polaris 600  

Safety information definitions

Target group

Duties of the operating organization

The tasks described in this document specify the 

requirements that have to be met by each 

respective target group.

The operating organization of this product must 

ensure the following:
– The target group has the required qualifications 

(e.g., has undergone specialist training or 

acquired specialist knowledge through 

experience).

– The target group has been trained to perform 

the task.

– The target group has read and understood the 

chapters required to perform the task.

Description of target groups

The target groups may only perform the following 

tasks if they meet the corresponding requirements.

Users

This target group includes healthcare 

professionals such as surgeons and OR nurses.

Reprocessing personnel

This target group includes persons who are 

responsible for the reprocessing of medical 

devices.

WARNING

A WARNING statement provides important 

information about a potentially hazardous 

situation which, if not avoided, could result in 

death or serious injury.

CAUTION

A CAUTION statement provides important 

information about a potentially hazardous 

situation which, if not avoided, may result in 

minor or moderate injury to the user or patient or 

in damage to the medical device or other 

property.

NOTE

A NOTE provides additional information intended 

to avoid inconvenience during operation.

Task

Requirement

Use of the product in 

accordance with its 

intended use

Training in a relevant 

healthcare field or in a 

medical discipline and 

knowledge of the use of the 

product

Task

Requirement

Reprocessing

Specialist knowledge in the 

reprocessing of medical 

devices

Содержание Polaris 600

































































































Отзывы:

Нет отзывов