Dräger Polaris 600 Скачать руководство пользователя страница 39

Страница: 39 / 96

Instructions for use

Polaris 600

Operation

Status LEDs

The description of this function applies to both the

light control panel and the wall-mounted control

panel. Only the light control panel is shown in the

illustrations.

Status LED for monitoring a light

The status LED (A) for monitoring the light is

situated directly next to the

key.

– The status LED (A) is lit green.

The light is in operation.

– The status LED (A) is not lit.

The light is in standby mode.

– The status LED (A) is lit orange.

There is a light system fault, see "Fault –

Cause – Remedy" on page 60.

Status LED for monitoring the power supply

The status LED (A) for monitoring the power

supply for the light system is located to the left of

the

key.

– The status LED (A) is lit green.

The light is being supplied with mains power.

– The status LED (A) is lit orange.

The light is being supplied with emergency

power.

– The status LED (A) is not lit.

The light is not being supplied with power.

26399

26477

Содержание Polaris 600

































































































Результаты поиска

Содержание Polaris 600

Отзывы:

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 39 / 96

Результаты поиска

Содержание Polaris 600

Отзывы: