manualshive.com logo in svg

Dräger Polaris 600, Инструкция по эксплуатации, Страница: 29 / 96

Поделиться
Скачать
Dräger Polaris 600 Скачать руководство пользователя страница 29

Instructions for use

 

Polaris 600  

29

Operating concept

Correct operation of the sterilizable handle E

The touch-sensitive part of the handle is designed 

so that, for correct operation, only one finger must 

touch the operating section at any one time. If 

several fingers touch the operating section 

simultaneously, the operating signal will not be 

implemented.

Correct operation

– One finger at a time is touching the operating 

section

Operating signal will not be implemented

– Several fingers are touching the operating 

section at the same time

Wall-mounted control panel (option)

The wall-mounted control panel can incorporate up 

to 3 light control panels. Optionally it can include a 

camera control panel.

The keys on the wall-mounted control panel are 

pressure-sensitive, i.e., a certain pressure must be 

applied by the finger.

26658

26659

Содержание Polaris 600

































































































Отзывы:

Нет отзывов