Dräger Multi-PID 2, Руководство пользователя

Страница: 70 / 107

70
Menu Functions
Clear values Menu
Only available in GAS mode.
The " Clear values " function can be used to clear the latest measure-
ment values for the highest measured concentration (SMAX), the lat-
est STEL value or all values (ALL) which are shown in the display.
1. Press
" menu " , then use the "
l
" key to highlight " Clear
values " , then press " select " .
2. Selecting the values and pressing the " clear " key clear the high-
lighted values.
Edit Alarms Menu
Only available in GAS mode.
The " Edit Alarms " function can be used to edit the latest set alarm
values for the STEL and the REAL alarm.
1. Press
" menu " , then use the "
l
" key to highlight " Edit
Alarms " , then press " select " .
2. Use the "
l
" key to highlight " STEL alarm " or " REAL alarm " ,
then press " select " .
3. Use the "
q
" "
l
" and "
j
" keys to enter the desired value.
5. Highlight the "
n
" checkmark, then press " done " .
Humidity Tube Menu
Only available in TVOC mode.
The " Humidity Tube " function can be used in combination with a
PID pre-filter tube humidity (Order No. 81 03 531) to enhance the
measuring performance by reducing the humidity.
This tube is used to measure the Total Volatile Organic Compounds
value (TVOC) for 15 minutes (filter capacity of the tube at 40
o
C and
100 % relative humidity). Then you are asked to check the tube and to
replace it, if necessary.
1. Press
" menu " , then use the "
l
" key to highlight " Humidity
Tube " , then press " select " .