Dräger Multi-PID 2, Руководство пользователя

Страница: 69 / 107

69
Menu Functions
Clear Data Log
The " Clear data log " function clears all measurement values in the
Multi-PID 2 memory.
To empty the data logger in the Multi-PID 2:
1. Press the
" menu " key.
2. Use the "
l
" key to choose » Data Logger Options « , and then
press the " select " key.
3. Choose » Clear data log « , and then press the " select " key.
4. Press either the " yes " or " no " key in response to » Are you sure
you want to clear all data? « .
Edit interval
Only available in TVOC mode.
1. Press the " menu " key.
Use the "
l
" key to highlight " Data Logger Options " , then press
" select " .
3. Highlight " Edit interval " , then press " select " .
4. Use the "
q
" "
l
" and "
j
" keys to enter the desired sampling
interval.
5. Highlight the "
n
" checkmark, then press " done " .
Download to PC
The " Download to PC " function starts the download of data from the
Multi-PID 2 onto the PC. The Multi-PID 2 computer cable, Part No.
83 17 667, must be connected between the Multi-PID 2 and the PC
before beginning the data download. The Dräger GasVision software
must be installed and running on the PC prior to download.
To download data:
1. Press the
" menu " key.
2. Use the "
l
"-key to choose » Data Logger Options « the press
the " select " key.
3. Use the "
l
" key to choose » Download to PC « , then press the
" select " key.
4. Press the " next " key at the » Connect Instrument to PC «
prompt.
5. The display will show » Downloading Data « and data will now
download to the PC. Press the " done " key to stop the download
at any time.
NOTE:
Deleted information cannot be recovered. You should play back
and print or download the contents of the datalogger before
deleting any information.