Dräger Multi-PID 2, Руководство пользователя, Страница: 46 / 107

46
Connecting Accessories
To remove a pre-filter tube from the tube holder:
1. Unscrew the top part of the tube holder immediately above the
tube window.
2. Lift the pre-filter tube from the tube holder.
3. Either insert another tube or re-attach the top part of the tube hol-
der.
Pre-filters and Sample Collection Tubes
Dräger Safety provides a variety of pre-filter tubes for the Multi-PID 2.
The tubes are custom developed for Dräger Safety AG & Co., and
address clean air calibration and humidity reduction to facilitate more
accurate sampling.
The optional sample collection tubes are standard Dräger tubes used
for collecting VOC samples for analysis later in a lab or other analytic
facility.
Figure 13 – Dräger Pre-filter Tubes
Sample Line
A 3-meter (9’) sample line (Part No. 64 05 411) may be connected to
the Multi-PID 2 for remote sampling. Connect the sample line to the
Multi-PID 2 inlet using the fittings supplied with the sample line.
CAUTION:
When using the sample line, be especially careful
not to aspirate liquids or solids as they will damage
the Multi-PID 2.
0262395
7_0
1
_de.eps