Dräger Multi-PID 2, Руководство пользователя

Страница: 45 / 107

45
Connecting Accessories
6. On the Multi-PID 2, press the " menu " key, choose » Data Log
Options « , then press the " select " key.
7. Choose the » Download to PC « option using the "
l
" key and
press the " select " key.
8. Follow the Multi-PID 2 prompts to start the data download.
Pre-filter Tube Holder
The optional pre-filter tube holder (Order No. 83 19 093) is shown in
figure 12. The pre-filter tube holder is designed to hold the optional
charcoal pre-filter tube (Order No. CH 24 101) for calibration in clean
air, the optional PID pre-filter tube humidity (Order No. 81 03 531) to
enhance the measuring performance in TVOC mode by reducing the
humidity, the optional sampling tube with activated carbon (Order No.
67 33 011) and the PID pre-filter tube benzene (Order No. 81 03 511)
for selective benzene measurement in GAS mode.
The tube holder attaches to the Multi-PID 2 on the inlet nozzle repla-
cing the standard inlet nozzle cap. It is a simple twist lock application.
Figure 12 – Tube Holder
To insert a pre-filter tube into the tube holder:
1. Unscrew the top part of the tube holder immediately above the
tube window.
2. Break off each end of the glass tube by inserting the end into the
opening as shown.
3. Insert tube into holder.
4. Re-screw on the top part of the tube holder (note: the tube holder
is designed to compensate for any minor irregularities in the tube
that result from the breaking off of each end).
NOTE:
A DB-25, female connector is sometimes a parallel port. Do not
connect the serial port of the converter to a parallel port.
0252395
7_0
1
_de.eps