Dräger Multi-PID 2, Руководство пользователя

Страница: 32 / 107

32
Using the Multi-PID 2
Keys
Fixed Keys
The Multi-PID 2 has two fixed keys. The first fixed key is the -key
(on/off). The second fixed key is the dedicated -key (calibration
key). Pressing the -key will start calibration in almost any mode.
The -key is used to both turn power on to the Multi-PID 2 as well
as the turn the power off. To turn on the Multi-PID 2, press the -
key. To turn the power off, press the -key and hold it down for 5
seconds, and then release it. This is done to prevent accidental power
off.
Soft Keys
The three soft keys on the Multi-PID 2 are located directly below the
display. Each key has varying functions for configuring the
Multi-PID 2, editing the data, and controlling the display. Since only
three soft keys are available, each function is broken down into a path.
CAL
CAL