Dräger CPS 6800, Инструкция по эксплуатации

Страница: 37 / 104

Technical data
Dräger CPS 6800 37
9 Technical data
9.1 General
Sizes in cm:
9.2 Resistance to penetration of infectious
agents
9.3 Resistance of the suit material
Suit
size
Height Chest
measure-
ment
Waist
measure-
ment
S 150-165 82-112 68-100
M 160-175 92-118 72-110
L 170-185 93-122 77-112
XL 180-195 96-124 77-113
XXL 190-205 99-130 78-118
Weight:
Suit size L,
with face cuff
and boots sizw 45,
without accessories
approx. 5.4 kg
Suit size L,
with face cuff
and boots size 45,
with accessories
approx. 5.9 kg
Suit size L,
with face cuff and socks,
without accessories
approx. 2.9 kg
Material:
Chemical protective suit Umex
Gloves
FKM or
FKM/Butyl or
Butyl or
Laminate: HPPE or
K-MEX-Gigant: Para-Aramid or
Tricotril: Nitrile/Para-Aramid
Safety boots Nitrile-P
black, FPA-CR safety boots with
plastic sole, cut and fire resistant,
textile lining inside, sizes see
Chapter 11 on Page 41
PVC:
yellow, black grip sole, sizes see
Chapter 11 on Page 41
Colours:
Outside/inside red/red
Temperatures:
During use
-30 °C to +60 °C
1
For short-term exposure, lower
temperatures (up to -80 °C) are
possible and have been tested by
Dräger for the material Umex, but
not as part of the prototype tests.
Observe operating temperatures of
the respiratory protective
equipment!
1 Tested by Dräger
During storage -5 °C to +25 °C
Test Result Category
1
1 according to EN 14126:2003+AC:2005
Resistance to contaminated
liquids under hydrostatic
pressure
hydrostatic
pressure:
20 kPa
6
Test Result Class
1
1 according to EN 943-1:2015
Abrasion resistance >2000 cycles 6
Flex-cracking resistance
>100000 cycles 6
Flex-cracking resistance at
-30 °C
2
2 according to EN 14126:2003+AC:2005
>4000 cycles 6
Tear resistance
>60 N 4
Bursting strength
643 kPa 5
Puncture resistance
>50 N
3
3
3 according to EN 1073-1:2016+A1:2018 and EN 1073-2:2002:
class 2
Resistance to flame
penetration
self-extinguishing fulfilled
Seam strength
>500 N 6
Tensile strength
>1000 N 6