Dräger Babyleo TN500, Инструкция по эксплуатации, Страница: 117 / 222

Instructions for use Babyleo TN500 SW 1.0n 117
Operation
Offers access to a table of the last weight measurement with the following
information: date and time, weight and manually adjusted weight. This button allows
to switch between the graphical view and the tabular view.
Only one weight measurement per day is saved in the graphical view and the
tabular view. Only the last measured value is saved.
6.18.2 Connecting the scale
Prerequisites:
–
The device has a connection for the scale (option).
– A scale is integrated in the bed support.
– The "Scale" software option is included in the device.
WARNING
Risk of electric shock
If the contact pins are touched, the user and the patient will be exposed to the risk
of an electric shock.
► Do not touch the pins in the plug of the scale.
Procedure:
1
Make sure that the scale cable faces the sensor wall.
2 Place the bed support with the scale on the T-bars from above.
3 Pull the cable through the hose grommet in the center of the sensor wall and
push it into the cable guide.
4 Make sure that the cable runs downward between the bed support and the
sensor wall and is not caught.
5 Insert the gray plug for the scale into the gray socket on the rear of the sensor
wall.
✓
The scale is connected to the device.
6.18.3 Weighing
This chapter describes how to weigh the patient in the device.
Prerequisites:
–
The device is in operation and the scale is connected.
– The bed support is resting securely on the T-bars and is not tilted to the side.
– The locking brakes are engaged.
– A mattress is placed on the mattress tray.
– The patient is lying in the center of the mattress.