Dräger Medical JM-103, Руководство по эксплуатации

Страница: 38 / 92

DRAFT 20 June 2005
Page 5 - 2 Jaundice Meter (Model JM-103) User Manual (usr070)
3. Set the Power switch to the On
position. The measured value for a
single measurement,
n-1 , appears on the
display.
NOTE:
The JM-103 is a screening device for
Bilirubin in the tissues and should never
be used as a stand-alone measurement.
Always contact the physician whenever
the JM-103 measurements present a concern. The physician will
make the determination regarding the laboratory blood serum
TSB, as well as other clinical considerations, as these are
appropriate measurement for Bilirubin concentration as stated in
the indications for use.
4. Visually check that the Ready lamp
illuminates.
5. If the battery indicator blinks, charge the
battery (see “Charging the Battery” on
page 4-1).
WARNING:
This instrument emits intense light to take its measurements.
Take measurements only at the forehead or sternum (hospital
application). Doctors’ office use should be performed at the
sternum only. Do not press the measuring probe when it is
directed toward the infant’s or caregiver’s eyes. Damage to the
eyes could occur.
6. Perform the following:
a. Place the measuring probe
vertically against the infant’s
forehead (at hospital sites only) or
sternum (at hospital sites or
physicians’ offices). Avoid any
bruises or discolored areas of the
skin.