CONTACT US AT
www.DRpower.com
29
Troubleshooting Table (Continued)
S
YMPTOM
P
OSSIBLE
C
AUSE
Engine smokes.
Check the oil level and adjust as needed.
Clean the Engine cooling fins and the carburetor housing if they are dirty.
The Air Filter may be dirty; change it following the procedure in the Engine Owner’s Manual.
You may be using the wrong oil. Refer to your Engine Owner’s Manual for detailed
information.
If the Engine still smokes, visit our website at www.DRpower.com.
The Engine runs well but
the machine is not
Blowing Snow.
Augers may not be turning. Check Auger Belt/s and Shear Bolts and replace as needed.
Impeller may not be turning. Check Impeller Belt and Shear Bolts and replace as needed.
The Wheels are not
Turning when the
Traction Drive Lever is
engaged.
Traction Drive Belt is Stretched or worn. Replace the Belt.
The Traction Drive Pulley face is dirty or wet. Clean as needed.
The Friction Wheel is worn or damaged. Replace as needed.
Shut down the engine, remove the spark plug wire and wait 5 minutes before performing any maintenance procedure or
inspection on the SNOW BLOWER.
Содержание PRO MAX-34
