background image

4

 

        

DR

® 

K10 RAPIDFIRE™ LOG SPLITTER

 

This is a high-powered machine, with moving parts operating with high energy.  You must operate the machine safely.  Unsafe 
operation can create a number of hazards for you, as well as anyone else in the nearby area.  Always take the following precautions 
when using this machine: 

 

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property, and 
themselves. 

 

Always wear protective goggles or safety glasses with side shields while using the Log Splitter to protect your eyes from 
possible thrown debris. 

 

Avoid wearing loose clothing or jewelry, which can catch on moving parts. 

 

We recommend wearing gloves while using the Log Splitter.  Be sure your gloves fit properly and do not have loose cuffs or 
drawstrings. 

 

Wear shoes with non-slip treads when using your Log Splitter.  If you have safety shoes, we recommend wearing them.  Do 
not use the machine while barefoot or wearing open toed sandals. 

 

Wear long pants while operating the Log Splitter. 

 

Use ear protectors or ear plugs rated for at least 20 dba to protect your hearing. 

 

Keep bystanders at least 50 feet away from your work area at all times.  Stop the motor when another person or pet 
approaches. 

Protecting Yourself and Those Around You 

Safety for Children and Pets 

Tragic accidents can occur if the operator is not alert to the presence of children and pets.  Children are often attracted to the 
machine and the splitting activity.  

Never assume that children will remain where you last saw them.  Always follow these 

precautions:

 

 

Keep children and pets at least 50 feet from the working area and ensure they are under the watchful care of a responsible 
adult. 

 

Be alert and turn the machine off if children or pets enter the work area. 

 

Never allow children to operate the Log Splitter.

 

Содержание K10 RAPIDFIRE

























Отзывы: