Dr.Prepare DPWS-OUT-001, Руководство пользователя

Страница: 4 / 17

PREPARATION
Open the battery compartment of the Projection Clock and insert
two AAA batteries based on "+" and "-" polarity marks.
Insert the power cord to the socket of your Projection Clock.
All the icons on the LCD screen will light up for 3 seconds. After
a beep, the clock will display indoor temperature.
The Projection Clock starts to connect the Remote Sensor,
which takes about 3 minutes. A flashing RF antenna symbol will
be displayed on the Projection Clock.
B1: “ ” button B2: “MODE” button
B3: “MEM” button B4: “+” button
B5: “-” button B6: “LOOP” button
B7: “RAINBOW” button B8: Alarm1 on/off switch
B9: Alarm2 on/off switch B10: USB output port
B11: Battery compartment B12: Power supply socket
B13: Projection on/off switch
Part B-Buttons and switches
Part C –Wireless remote sensor
C1: Battery compartment
- 04 -