Dr.Prepare DPWS-OUT-001, Руководство пользователя

Страница: 11 / 17

TRANSMISSION OF THE WIRELESS REMOTE SENSOR
When the Projection Clock receives signals from a Wireless
Sensor, the temperature from the sensor is displayed in the
"OUT" column of the Projection Clock.
If the Projection Clock fails to receive transmission from outdoor
sensor ("--" will be displayed on the LCD). Long press "+" button
for 2 seconds to start transmission manually. During the
reception, there will be an animation of the RF antenna symbol
on the Projection Clock.
You may refer to the following icons:
NOTE
When a Wireless Sensor is connected with the Projection Clock,
the Projection Clock will display the same channel number used
by the sensor in "OUT" column. When no signal is transmitted
via any channel, "--" will be displayed on the Projection Clock.
The default setting of this Wireless Remote Sensor is Channel 1.
The temperature is rising.
The temperature remains constant.
The temperature is falling.
- 11 -