6
DR
®
2-CYCLE TILLER CULTIVATOR
Chapter 2: Setting up your DR 2-CYCLE TILLER CULTIVATOR
This chapter outlines a few simple steps you will need to follow to set up your new machine before you use it. It may be helpful to
familiarize yourself with the controls and features on your new machine by reviewing Figure 1 on the following page before
beginning the steps outlined in this chapter. For technical assistance, please visit our website at www.DRpower.com and one of
our Technical Support Representatives will be happy to help you.
DR 2-CYCLE TILLER CULTIVATOR Specification Sheet
Engine
Single Cylinder, 2-Cycle, Air Cooled
Engine Speed
9000 rpm
Displacement
43cc
Bore/Stroke
40/34 (mm)
Power Output
1.34 HP
Max Torque Output
1.18 ft.lbs
Fuel Tank Capacity
28.7 oz (850 ml)
Fuel Type
Gas/Oil Mixture
Gas/Oil Mix Ratio
50:1 (2.6 ounces Oil per 1 gallon gas)
Gas Type
Minimum 87 Octane with Low Ethanol Content
Oil Type
2-Cycle Engine Oil
Spark Plug
LD L6
Spark Plug Gap
.021" (.53mm)
Transmission Gear Ratio
32:1
Tilling Width
11" (27.9cm)
Tilling Depth
0-8" (0-20.3cm)
Tine Speed
288 RPM max
Wheel Size
7.0" diameter x 1.375" wide (17.8 cm x 3.5 cm)
Machine Weight
29 lbs. (13.2kg)
Machine Dimensions
36" x 18.5" x 39". (91.4cm x 47cm x 99.1cm)
