DPS Telecom NetGuardian 216F, Руководство пользователя

Страница: 23 / 60

19
Back Panel LEDs 8
Back panel LEDs for Power and Ethernet connections
The back panel LEDs indicate the status of power and Ethernet connections. LED status messages are described
below.
LED Status Description
Power
Pwr A
Off Power not applied or polarity incorrect
Green Power applied
Pwr B
Off Power not applied or polarity incorrent
Green Power applied
Fuse
Alarm
---
Red Fuse A or B is blown
10/100/1000
BaseT Switch
Green Flashing Activity on port detected
Orange Solid Link detected
SFP Fiber
Interface
Port 1
Red SFP detected, no link
Green SFP detected, link is up
Port 2
Red SFP detected, no link
Green SFP detected, link is up
Back panel LED Status message descriptions
Configuring the NetGuardian 9
The NetGuardian must be provisioned with log-on passwords, alarm descriptions, port parameters, ping targets,
control descriptions, and other system information. You can provision the NetGuardian using either the Edit216F
software or the Web interface. The NetGuardian also supports a limited TTY interface for configuring some basic
options. (For full instructions on configuring the NetGuardian, see the software configuration guides on the
NetGuardian Resource CD.)
You can provision the NetGuardian either locally through the craft port or remotely through a LAN connection.
However, to access the NetGuardian via LAN you must first make a temporary connection to the NetGuardian and
assign it an IP address on your network. For more information, see Section 10, "Connecting to the NetGuardian."