DPS Telecom D-PK-NGDLT, Руководство пользователя

Страница: 18 / 86

12
NetGuardian LT G2 Front Panel 5.3
5.3.1 Discrete Alarms and Relay Connection
Fig. 5.3.1 Discrete alarm inputs, analogs and control relays are wired using the spring-clamp terminal
block connectors.
Convenient Latching Terminations - No Screwdriver Necessary
The spring-clamp terminal block connectors make wiring alarms fast and easy. The NetGuardian LT G2 features
up to 4 discrete alarm inputs (depending on your build option.) There are 2 input poles per alarm. The analog
(depending on your build option) is intended for monitoring a single 4-20mA sensor. Your option may also include
either 12 or 24VDC power output for power a sensor up to 1/2 AMP. The unit's relay connector has 3 outputs for
Normally Open (NO), Normally Closed (NC), and Common (CO).
1. Strip a small piece off the end of the wire.
2. Flip open the connector for the desired alarm input. Lock it down over the wire.
3. Indicator LEDs on the front panel show you the summary status. Check for solid green light to see if power is
connected.