DPS Telecom D-PK-NG432, Руководство пользователя

Страница: 46 / 80

42
Sensors 10.10
D-Wire Sensors
The NetGuardian supports up to 16 daisy-chained D-Wire sensors via its D-Wire input. Sensors connected to the
NetGuardian will appear on the web interface. The background color of the ROM field informs the user of the sensor's
configuration state.
Also the NetGuardian's first D-Wire sensor used to monitor the internal temperature. The internal temperature sensor
measures a range of -40° F to 180° F (-40° C to 82.2° C) within an accuracy of about ± 2°.
Basic configuration for the NetGuardian's D-Wire temperature sensors can be accomplished from the Provisioning
> Sensors menu. From this screen, you can configure D-Wire sensors, select notification devices, and set
thresholds.
The Provisioning > Sensors menu
Basic Sensor Configuration
ID Sensor ID number.
ROM ID
The ID number found on the sticker of the temperature sensor node. Your
NetGuardian will automatically detect the sensor ID when you plug a sensor into the
unit. The color of the sensor ID field will tell you the status of the connected sensor.
Green - The sensor is connected and properly configured.
Yellow - The sensor is connected but has not yet been configured (fill in your
configuration fields and click Save to configure the sensor).
Red - The sensor is not detected and configured (i.e. a previous configured sensor is
no longer connected).
Blue - The sensor is not supported by the NetGuardian.
To reconfigure or disable the Sensor ID, simply delete any data in this field and click
Save .
The unit will refresh the sensor ID on that channel.
Description User-definable description for the sensor channel.
Parse Checks to see if the Description field contains a valid derived equation.
Notification Devices
Check which notification device(s), 1 through 8, you want to send alarm notifications
for that alarm point.