DPCAV AV680RX, Быстрый старт

Страница: 1 / 9

AV680RX-Kit, Rev-B Page 1 © Nov-03-2008
AV680RX 5.8GHZ A/V RECEIVER KIT
Rev-B Kit
INTRODUCTION
Thanks to this handy kit, building a high performance 5.8GHz
A/V receiver has never been easier. The kit provides a
custom printed circuit board set and quality electronic
components.
NOTICE: This kit requires assembly and is NOT
recommended to beginners. It is suitable for amateur radio
hobbyists, RF technicians, and engineers. The builder must
have good quality soldering tools, an anti-static work
environment, and electronic assembly experience.
B
ILL OF
M
ATERIALS
QTY DESCRIPTION DESIGNATOR NOTES
==== =================== ============ =========================
4 .1uF Cap C3, C5, C11, C12
4 47uF Cap C1, C2, C7, C9 Observe polarity
4 470uF/10V Cap C4, C6, C8, C10 Observe polarity
2 2.2 1/8W Resistor R4, R5 Red/Red/Black
1 220 1/8W Resistor R4 Red/Red/Brown
3 3.3K 1/8W Resistor R1, R2, R3 Orange/Orange/Red
1 27uH Inductor L1
1 1N4001 Diode D1 Observe polarity
1 Green LED PWR Observe polarity
1 LM2940T-5.0 VReg IC U1
2 3-Pin Vertical Header J5, J6
2 Jumper Shunt J5, J6 Assy See Text for shunt installation
2 1/8" Phone Jack J2, J3
1 4-Pos DIP Switch SW
1 2.1mm DC Jack J1
1 2.1mm DC Plug J1 Assy
1 SMA-RP Connector N/A Antenna RF connector
1 AWM680RX RF Module
8 2-56 x 1/8" Screws Cover Assy
4 2-56 x 7/16" Spacers Cover Assy Female-Female, Top Cover
4 2-56 x 3/16" Spacers Cover Assy Male-Female, Bottom cover
4 Rubber Feet Cover Assy
1 Printed Circuit Board Set PCB 3-piece set (Top/Main/Bottom)
RECOMMENDED ACCESSORIES (available from www.dpcav.com)
5.8GHz 8dBi Patch Antenna, #HG5808P-SMA and Coax Cable #CSR400 or #CSR316.
5.8GHz 5dBi Patch Antenna, #AWM5.8ANT
5.8GHz 4dBi Dipole Antenna, #ANTDRP-5.8.
5.8GHz 2dBi Dipole Antenna, #ANTTRP-5.8.
5.8GHz 8dBi Log Periodic Antenna, #HG2458-08LPNF (requires #SMA-NM1 and #SMA-015)
3.5mm to RCA A/V Cable, #RSA-002.