Connecting and disconnecting the cable
The 5.1 output of the 5100 runs through a multi-pin Lemo connector carrying all six channels electronically balanced. The enclosed DAO5105 5 m (16 ft) six-pair
Mogami cable breaks out to six Neutrik XLR-M connectors. Other cable lengths are available as optional accessories.
Note
To align the two red marks, gently push the connector into the terminal beneath the 5100 until it locks with a click.
Disconnect the cable by drawing it away from the 5100 at the cylinder. This will unlock the connector.
Cable configuration
5.1 channel
Cable no.
Color code
Memory aid
L
1
Yellow
L
in ye
L
low and
L
eft
R
2
Red
R
in
R
ed and
R
ight
C
3
Orange
Combination color between yellow and red
LFE
4
Gray
Gray (LFE) does not have full bandwidth
LS
5
Blue
Dark colors for Rear Channels:
L
in B
L
ue and
L
eft,
R
in G
R
een and
R
ight
RS
6
Green
48V Phantom power should be applied to all six cables. Note, the LFE output is only active when phantom power is applied to Left and Right.
Application notes
The DPA 5100 can be used handheld, mounted on a camera, on a microphone stand
or suspended. Further shock absorption is not necessary.
DPA OC5100 Outdoor Cover
When using the 5100 outdoors, always mount the DPA OC5100 Outdoor Cover,
which both protects the unit against rain and reduces wind noise.
Extension units
When mounted on a handheld camera, it may be necessary to
increase the distance between the microphone and any noise
sources such as camera zoom and breathing.
5
